Reference Guide

Field Description
Traffic monitor 1 Traffic coming to class 1.
Traffic monitor 2 Traffic coming to class 2.
Traffic monitor 3 Traffic coming to class 3.
Traffic monitor 4 Traffic coming to class 4.
Traffic monitor 5 Traffic coming to class 5.
Traffic monitor 6 Traffic coming to class 6.
Traffic monitor 7 Traffic coming to class 7.
Total: yellow Total number of packets that have exceeded the configured
committed rate.
Total: red Total number of packets that have exceeded the configured peak
rate.
Example (Rate
Police)
FTOS#show interfaces gigabitEthernet 1/2 rate police
Rate police 300 (50) peak 800 (50)
Traffic Monitor 0: normal 300 (50) peak 800 (50)
Out of profile yellow 23386960 red 320605113
Traffic Monitor 1: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 2: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 3: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 4: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 5: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 6: normal NA peak NA
Out of profile yellow 0 red 0
Traffic Monitor 7: normal NA peak NA
Out of profile yellow 0 red 0
Total: yellow 23386960 red 320605113
strict-priority queue
Configure a unicast queue as a strict-priority (SP) queue.
C-Series, E-Series, S-Series, Z-Series
Syntax
strict-priority queue unicast number
Parameters
unicast number Enter the keyword unicast followed by the queue number. For the
C-Series and S-Series, the range is 1 to 3. For the E-Series, the range
is 1 to 7.
Defaults none
Command Modes CONFIGURATION
1327