Reference Guide
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-Series.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
Usage
Information
NOTE: Per Port rate limit and rate police is supported for Layer 2 tagged and untagged
switched traffic and for Layer 3 traffic. Per VLAN rate limit and rate police is supported on
only tagged ports with Layer 2 switched traffic.
C-Series and S-Series
On one interface, you can configure the rate police command for a VLAN or you can
configure the
rate police command for an interface. For each physical interface, you can
configure three rate police commands specifying different VLANS.
E-Series
On one interface, you can configure the rate limit or rate police command for a
VLAN or you can configure the rate limit or the rate police command for the
interface.
For each physical interface, you can configure six rate police commands specifying
different VLANS.
After configuring VLANs in the rate police command, if this error message appears:
%Error: Specified VLANs overlap with existing config. check to see if
the same VLANs are used with the rate limit command on other interfaces. To clear the
problem, remove the
rate limit configuration(s), and re-configure the rate police
command. After the rate police command is configured, return to the other interfaces
and re-apply the
rate limit configuration.
Related
Commands
rate-police – specifies traffic policing on the selected interface.
rate shape
Shape the traffic output on the selected interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
rate shape [kbps] rate [burst-KB]
Parameters
kbps Enter the keyword kbps to specify the rate limit in Kilobits per
second (Kbps). On C-Series and S-Series, make the following value a
multiple of 64. The range is 0 to 10000000. The default granularity is
Megabits per second (Mbps).
rate
Enter the outgoing rate in multiples of 10 Mbps. The range is 10 to
10000.
1321