Reference Guide

Parameters
access-list Enter the name of a standard access list. Maximum 16 characters.
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.1.0 Introduced
Usage
Information
Do not enter this command before creating the access-list.
ipv6 pim query-interval
Change the frequency of IPv6 PIM router-query messages.
E-Series, S4810
Syntax
ipv6 pim query-interval seconds
To return to the default value, use the no ipv6 pim query-interval seconds
command.
Parameters
seconds Enter a number as the number of seconds between router query
messages. The range is 0 to 65535. The default is 30 seconds.
Defaults 30 seconds
Command Modes INTERFACE
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 7.4.1.0 Introduced
ipv6 pim register-filter
Configure the source DR so that it does not send register packets to the RP for the specified sources and groups.
E-Series, S4810
Syntax
ipv6 pim register-filter access-list
Parameters
access-list Enter the name of the extended ACL that contains the sources and
groups to be filtered.
Defaults none
Command Modes CONFIGURATION
1277