Reference Guide

GigabitEthernet 8/0
(*, 226.1.1.2), uptime 00:18:08, expires 00:00:52, RP
10.211.2.1, flags: SCJ
Incoming interface: GigabitEthernet 4/23, RPF neighbor
10.211.1.2
Outgoing interface list:
GigabitEthernet 8/0
(*, 226.1.1.3), uptime 00:18:08, expires 00:00:52, RP
10.211.2.1, flags: SCJ
Incoming interface: GigabitEthernet 4/23, RPF neighbor
10.211.1.2
Outgoing interface list:
GigabitEthernet 8/0
(*, 226.1.1.4), uptime 00:18:08, expires 00:00:52, RP
10.211.2.1, flags: SCJ
Incoming interface: GigabitEthernet 4/23, RPF neighbor
10.211.1.2
Outgoing interface list:
GigabitEthernet 8/0
show running-config pim
Display the current configuration of PIM-SM snooping.
E-Series ExaScale, S4810
Syntax
show running-config pim
Command Modes EXEC Privilege
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.4.1.0 Introduced on the E-Series ExaScale.
Example
FTOS#show running-config pim
!
ip pim snooping enable
Related
Commands
ip pim snooping – enables PIM-SM snooping.
IPv6 PIM-Sparse Mode Commands
The following describes the IPv6 PIM-sparse mode (PIM-SM) commands.
1273