Reference Guide

Field Description
Neighbor address Displays the IP address of the neighbor learned through PIM-SM
snooping.
Interface Displays the VLAN ID number and slot/port on which the PIM-SM-
enabled neighbor was discovered.
Uptime/expires Displays the amount of time the neighbor has been up followed by
the amount of time until the neighbor is removed from the multicast
routing table (that is, until the neighbor hold time expires).
Ver Displays the PIM version number:
• v2 = PIM version 2
DR prio/Mode Displays the Designated Router priority and the mode:
• 1 = default Designated Router priority (use the ip pim
dr-priority command)
• DR = Designated Router
• S = Sparse mode
Example
FTOS#show ip pim snooping neighbor
Neighbor Interface Uptime/Expires Ver DR Prio
Address
165.87.32.2 Vl 2 [Gi 4/13 ] 00:04:03/00:01:42 v2 1
165.87.32.10 Vl 2 [Gi 4/11 ] 00:00:46/00:01:29 v2 0
165.87.32.12 Vl 2 [Gi 4/20 ] 00:00:51/00:01:24 v2 0
show ip pim snooping tib
Display information from the tree information base (TIB) discovered by PIM-SM snooping about multicast group
members and states.
E-Series ExaScale, S4810
Syntax
show ip pim snooping tib [vlan vlan-id] [group-address [source-
address]]
Parameters
vlan vlan-id (OPTIONAL) Enter a VLAN ID to display TIB information discovered by
PIM-SM snooping on a specified VLAN. The valid VLAN IDs range is 1
to 4094.
group-address (OPTIONAL) Enter the group address in dotted decimal format
(A.B.C.D) to display TIB information discovered by PIM-SM snooping
for a specified multicast group.
source-address (OPTIONAL) Enter the source address in dotted decimal format
(A.B.C.D) to display TIB information discovered by PIM-SM snooping
for a specified multicast source.
1268