Reference Guide

If you disable the sending of routing updates on an interface, the particular address prefix will
continue to be advertised to other interfaces, and updates from other routers on that interface
continue to be received and processed.
OSPFv3 for IPv6 routing information is neither sent nor received through the specified router
interface. The specified interface address appears as a stub network in the OSPFv3 for IPv6
domain.
redistribute
Redistribute into OSPFv3.
C-Series, E-Series, Z-Series, S4810
Syntax redistribute {bgp as number}{connected | static}[metric metric-value | metric-
type
type-value] [route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute {connected | static} command.
Parameters
bgp as number
Enter the keyword bgp followed by the autonomous system number.
Range: 1 to 65535.
connected
Enter the keyword connected to redistribute routes from physically
connected interfaces.
static
Enter the keyword static redistribute manually configured routes.
metric metric-
value
Enter the keyword metric followed by the metric value.
Range: 0 to 16777214
Default: 20
metric-type type-
value
(OPTIONAL) Enter the keyword metric-type followed by the OSPFv3
link state type of 1 or 2 for default routes. The values are:
1 = Type 1 external route
2 = Type 2 external route
Default: 2
route-map map-
name
(OPTIONAL) Enter the keyword route-map followed by the name of an
established route map. If the route map is not configured, the default
is deny (to drop all routes).
tag tag-value
(OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPFv3.
Range: 0 to 4294967295
Default: 0
1241