Reference Guide

ipv6 ospf hello-interval
Specify the time interval between the hello packets sent on the interface.
C-Series, E-Series, Z-Series, S4810
Syntax
ipv6 ospf hello—interval seconds
To return to the default time interval, enter no ipv6 ospf hello—interval.
Parameters
seconds
Enter the time interval in seconds as the time between hello packets.
Range: 1 to 65535 seconds.
Defaults 10 seconds (Ethernet).
Command Modes INTERFACE
Command History
Version 9.1.(0.0) Introduced on the S4810 and Z9000.
Version 7.8.1.0 Added support for the C-Series.
Version 7.4.1.0 Introduced on the E-Series.
Usage
Information
The time interval between hello packets must be the same for routers in a network.
Related
Commands
ipv6 ospf dead-
interval
Specify the time interval between hello packets was received from a
router.
ipv6 ospf priority
Set the priority of the interface to determine the Designated Router for the OSPFv3 network.
C-Series, E-Series, Z-Series, S4810
Syntax
ipv6 ospf priority number
To return to the default time interval, enter no ipv6 ospf priority.
Parameters
number
Enter the number as the priority.
Range: 1 to 255.
Defaults 1
Command Modes INTERFACE
Command History
Version 9.1.(0.0) Introduced on the S4810 and Z9000.
Version 7.8.1.0 Added support for the C-Series.
1238