Reference Guide

default-information originate
Configure the FTOS to generate a default external route into an OSPFv3 routing domain.
C-Series, E-Series, Z-Series, S4810
Syntax
default-information originate [always] [metric metric-value]
[metric-type type-value] [route-map map-name]
To return to the default values, use the no default-information originate
command.
Parameters
always (OPTIONAL) Enter the keyword always to specify that default route
information must always be advertised.
metric metric-
value
(OPTIONAL) Enter the keyword metric followed by a number to
configure a metric value for the route. The range is 1 to 16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type followed by an
OSPFv3 link state type of 1 or 2 for default routes. The values are:
• 1 = Type 1 external route
• 2 = Type 2 external route
route-map map-
name
(OPTIONAL) Enter the keywords route-map followed by the name
of an established route map.
Defaults Disabled.
Command Modes ROUTER OSPFv3
Command History
Version 9.1.(0.0) Introduced on the S4810 and Z9000.
Version 7.8.1.0 Added support for C-Series.
Version 7.4.1.0 Introduced on the E-Series.
Related
Commands
redistribute – redistributes routes from other routing protocols into OSPFv3.
graceful-restart grace-period
Enable OSPFv3 graceful restart globally by setting the grace period (in seconds) that an OSPFv3 router’s neighbors will
continue to advertise the router as adjacent during a graceful restart.
E-Series TeraScale, Z-Series, S4810
Syntax
graceful-restart grace-period seconds
To disable OSPFv3 graceful restart, enter no graceful-restart grace-period.
1231