Reference Guide

• LINE
• INTERFACE
• TRACE-LIST
• VRRP
• ACCESS-LIST
• PREFIX-LIST
• AS-PATH ACL
• COMMUNITY-LIST
• ROUTER OSPF
• ROUTER RIP
• ROUTER ISIS
• ROUTER BGP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series and E-Series.
E-Series Original command.
Related
Commands
exit – returns to the lower command mode.
epoch
Set the epoch scheduling time for the chassis.
E-Series
Syntax
epoch {2.4 |3.2 | 10.4}
Parameters
2.4 Enter the keyword 2.4 to set the epoch to 2.4 micro-seconds and
lower the latency. This option is available on the E600i and E1200i E-
Series ExaScale systems only.
3.2 Enter the keyword 3.2 to set the epoch to 3.2 micro-seconds and
lower the latency. This option is available on the E600/E600i and
E1200/E1200i only. ExaScale does not supports this setting with FTOS
8.3.1.0 and later.
10.4 Enter the keyword 10.4 to set the epoch to 10.4 micro-seconds. This
is the default setting and is available on the E300, E600/E600i, and
E1200.
121