Reference Guide

Line Beginning with Description
“Number of...” Displays the number and type of areas configured for this process
ID.
Example
FTOS#show ip ospf 10
Routing Process ospf 10 with ID 1.1.1.1 Virtual router default-
vrf
Supports only single TOS (TOS0) routes
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Convergence Level 0
Min LSA origination 0 msec, Min LSA arrival 1000 msec
Min LSA hold time 5000 msec, Max LSA wait time 5000 msec
Number of area in this router is 1, normal 1 stub 0 nssa 0
Area BACKBONE (0)
Number of interface in this area is 1
SPF algorithm executed 205 times
Area ranges are
FTOS#
Related
Commands
show ip ospf database – displays information about the OSPF routes configured.
show ip ospf interface – displays the OSPF interfaces configured.
show ip ospf neighbor – displays the OSPF neighbors configured.
show ip ospf virtual-links – displays the OSPF virtual links configured.
show ip ospf asbr
Display all autonomous system boundary router (ASBR) routers visible to OSPF.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show ip ospf process-id asbr
Parameters
process-id Enter the OSPF Process ID to show a specific process. If no Process
ID is entered, command applies only to the first OSPF process.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support of Multi-Process OSPF.
Version 7.8.1.0 Added the process-id option, in support of Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series and E-Series.
1194