Reference Guide

level-1-2 (OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-
IS Level-1 and Level-2 routes.
level-2 (OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS
Level-2 routes.
metric metric-
value
(OPTIONAL) Enter the keyword metric followed by a number. The
range is 0 (zero) to 4294967295.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type followed by one of
the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map followed by the name
of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPF. The range is 0 to 4294967295.
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for Multi-Process OSPF.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
Usage
Information
IS-IS is not supported on the S-Series platforms.
router-id
Use this command to configure a fixed router ID.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
router-id ip-address
To remove the fixed router ID, use the no router-id ip-address command.
Parameters
ip-address Enter the router ID in the IP address format.
Defaults none.
Command Modes ROUTER OSPF
1190