Reference Guide

rip Enter the keyword rip to specify that RIP routing information is
redistributed.
static Enter the keyword static to specify that information from static
routes is redistributed.
metric metric-
value
(OPTIONAL) Enter the keyword metric followed by a number. The
range is 0 (zero) to 16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type followed by one of
the following:
• 1 = OSPF External type 1
• 2 = OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map followed by the name
of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag followed by a number. The range
is 0 to 4294967295.
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
Usage
Information
To redistribute the default route (0.0.0.0/0), configure the default-information
originate
command.
Related
Commands
default-information originate – generates a default route into the OSPF routing domain.
redistribute bgp
Redistribute BGP routing information throughout the OSPF instance.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
redistribute bgp as number [metric metric-value] | [metric-type
type-value] | [tag tag-value]
To disable redistribution, use the no redistribute bgp as number [metric
metric-value] | [metric-type type-value] [route-map map-name]
[tag tag-value] command.
1188