Reference Guide

access-list-name (OPTIONAL) Enter the name of an IP standard access list, up to 140
characters.
Defaults 110
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
distance ospf
Configure an OSPF distance metric for different types of routes.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
distance ospf [external dist3] [inter-area dist2] [intra-area
dist1]
To delete these settings, use the no distance ospf command.
Parameters
external dist3 (OPTIONAL) Enter the keyword external followed by a number to
specify a distance for external type 5 and 7 routes. The range is 1 to
255. The default is 110.
inter-area dist2 (OPTIONAL) Enter the keywords inter-area followed by a number
to specify a distance metric for routes between areas. The range is 1
to 255. The default is
110.
intra-area dist1 (OPTIONAL) Enter the keywords intra-area followed by a number
to specify a distance metric for all routes within an area. The range is
1 to 255. The default is 110.
Defaults
• external dist3 = 110
• inter-area dist2 = 110
• intra-area dist1 = 110
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
1169