Reference Guide

Related
Commands
redistribute – redistributes routes from other routing protocols into OSPF.
description
Add a description about the selected OSPF configuration.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
description description
To remove the OSPF description, use the no description command.
Parameters
description Enter a text string description to identify the OSPF configuration (80
characters maximum).
Defaults none
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
Related
Commands
show ip ospf asbr – displays the VLAN configuration.
distance
Define an administrative distance for particular routes to a specific IP address.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
distance weight [ip-address mask access-list-name]
To delete the settings, use the no distance weight [ip-address mask access-
list-name
] command.
Parameters
weight Specify an administrative distance. The range is 1 to 255. The default
is 110.
ip-address (OPTIONAL) Enter a router ID in the dotted decimal format. If you
enter a router ID, you must include the mask for that router address.
mask (OPTIONAL) Enter a mask in dotted decimal format or /n format.
1168