Reference Guide

aux 0 Enter the keywords aux 0 to reset the auxiliary port.

NOTE: This option is supported on the E-Series only.

console 0 Enter the keywords console 0 to reset the console port.

vty number

Enter the keyword vty followed by a number to clear a terminal line.

Range: 0 to 9.

Command Modes EXEC Privilege

Command History

Version 8.3.11.1 Introduced on the Z9000.

Version 8.1.1.0 Introduced on the E-Series ExaScale.

Version 7.6.1.0 Introduced on the S-Series.

Version 7.5.1.0 Introduced on the C-Series.

E-Series Original command.

configure

Enter CONFIGURATION mode from EXEC Privilege mode.

C-Series, E-Series, S-Series, Z-Series

Syntax

configure [terminal]

Parameters

terminal (OPTIONAL) Enter the keyword terminal to specify that you are

configuring from the terminal.