Reference Guide

Usage
Information
The following describes the show ip mroute command shown in the Example below.
Field Description
(S, G) Displays the forwarding entry in the multicast route table.
uptime Displays the amount of time the entry has been in the multicast
forwarding table.
Incoming interface Displays the reverse path forwarding (RPF) information towards the
source for (S,G) entries and the RP for (*,G) entries.
Outgoing interface
list:
Lists the interfaces that meet one of the following:
• a directly connected member of the Group
• statically configured member of the Group
• received a (*,G) or (S,G) Join message
Example
FTOS#show ip mroute
IP Multicast Routing Table
(*, 224.10.10.1), uptime 00:05:12
Incoming interface: GigabitEthernet 3/12
Outgoing interface list:
GigabitEthernet 3/13
(1.13.1.100, 224.10.10.1), uptime 00:04:03
Incoming interface: GigabitEthernet 3/4
Outgoing interface list:
GigabitEthernet 3/12
GigabitEthernet 3/13
(*, 224.20.20.1), uptime 00:05:12
Incoming interface: GigabitEthernet 3/12
Outgoing interface list:
GigabitEthernet 3/4
show ip rpf
View reverse path forwarding.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show ip rpf
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.7.0 Introduced on the S4810.
E-Series legacy
command
1137