Reference Guide

Designated bridge has priority 32768, address 0001.e801.6aa8
Designated port id is 128.257, designated path cost 0
Number of transitions to forwarding state 1
BPDU (MRecords): sent 21, received 9
The port is not in the Edge port mode
Usage
Information
The following describes the show spanning-tree msti 5 guard command shown in
the Example below.
Field Description
Interface Name MSTP interface.
Instance MSTP instance.
Sts Port state: root-inconsistent (INCON Root), forwarding (FWD),
listening (LIS), blocking (BLK), or shut down (EDS Shut).
Guard Type Type of STP guard configured (Root, Loop, or BPDU guard).
Example (Guard)
FTOS#show spanning-tree msti 5 guard
Interface
Name Instance Sts Guard type
------------------------------------
Gi 0/1 5 INCON(Root) Rootguard
Gi 0/2 5 FWD Loopguard
Gi 0/3 5 EDS(Shut) Bpduguard
spanning-tree
Enable the multiple spanning tree protocol on the interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
spanning-tree
To disable the multiple spanning tree protocol on the interface, use the no spanning-
tree command.
Parameters
spanning-tree Enter the keywords spanning-tree to enable the MSTP on the
interface.
Defaults Enable.
Command Modes INTERFACE
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
1124