Reference Guide

revision
The revision number for the multiple spanning tree configuration.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
revision range
To return to the default values, use the no revision command.
Parameters
range Enter the revision number for the MST configuration. The range is 0 to
65535. The default is 0.
Defaults 0
Command Modes MULTIPLE SPANNING TREE
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
Usage
Information
For two MSTP switches to be within the same MST region, the switches must share the same
revision number.
Related
Commands
msti – maps the VLAN(s) to an MST instance.
name – assigns the region name to the MST region.
show config
View the current configuration for the mode. Only non-default values are shown.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show config
Command Modes MULTIPLE SPANNING TREE
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
1120