Reference Guide

Command Modes CONFIGURATION (conf-lldp)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series and E-Series.
Related
Commands
debug lldp interface – debugs LLDP.
show lldp neighbors – displays the LLDP neighbors.
show running-config lldp – displays the LLDP running configuration.
advertise med location-identification
Configure the system to advertise a location identifier.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
advertise med location-identification {coordinate-based value |
civic-based value | ecs-elin value}
To return to the default, use the no advertise med location-identification
{coordinate-based
value | civic-based value | ecs-elin value}
command.
Parameters
coordinate-based
value
Enter the keywords coordinate-based followed by the
coordinated based location in hexadecimal value of 16 bytes.
civic-based value Enter the keywords civic-based followed by the civic based
location in hexadecimal format. The range is 6 to 255 bytes.
ecs-elin value Enter the keywords ecs-elin followed by the Emergency Call
Service (ecs) Emergency Location Identification Number (elin)
numeric location string. The range is 10 to 25 characters.
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series and E-Series.
Usage
Information
• ECS — Emergency call service such as defined by TIA or the national emergency
numbering association (NENA)
• ELIN — Emergency location identification number, a valid North America Numbering
Plan format telephone number supplied for ECS purposes.
1092