Reference Guide

Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series.
clear lldp neighbors
Clear LLDP neighbor information for all interfaces or a specific interfaces.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
clear lldp neighbors {interface}
Parameters
interface Enter the following keywords and slot/port or number information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by the slot/ port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitEthernet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series.
debug lldp interface
Enable LLDP debugging to display timer events, neighbor additions or deletions, and other information about incoming
and outgoing packets.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
debug lldp interface {interface | all}{events | packet {brief |
detail} {tx | rx | both}}
To disable debugging, use the no debug lldp interface {interface | all}
{events} {packet {brief | detail} {tx | rx | both}}
command.
1083