Reference Guide

Defaults Disabled.

Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-

interface

-lldp)

Command History

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Version 7.7.1.0 Introduced on the S-Series. Added the vlan-name option.

Version 7.6.1.0 Introduced on the C-Series.

Version 7.4.1.0 Introduced on the E-Series.

Commands

protocol lldp (Configuration) – enables LLDP globally.

debug lldp interface – debugs LLDP.

show lldp neighbors – displays the LLDP neighbors.

show running-config lldp – displays the LLDP running configuration.

advertise dot3-tlv

Advertise dot3 TLVs (Type, Length, Value).

C-Series, E-Series, S-Series, Z-Series, S4810

Syntax

advertise dot3-tlv {max-frame-size}

To remove advertised dot3-tlv, use the no advertise dot3-tlv {max-frame-

size} command.

Parameters

max-frame-size Enter the keywords max-frame-size to advertise the dot3

maximum frame size.

Defaults none