Reference Guide

show config
Display the current configuration of the selected VLAN.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show config
Command Modes INTERFACE VLAN
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
Example
FTOS(conf-if-vl-100)#show config
!
interface Vlan 100
no ip address
no shutdown
FTOS(conf-if-vl-100)#
show vlan
Display the current VLAN configurations on the switch.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show vlan [brief | id vlan-id | name vlan-name]
Parameters
brief (OPTIONAL) Enter the keyword brief to display the following
information:
• VLAN ID
• VLAN name (left blank if none is configured)
• Spanning Tree Group ID
• MAC address aging time
• IP address
id vlan-id (OPTIONAL) Enter the keyword id followed by a number from 1 to
4094. Only information on the VLAN specified is displayed.
name vlan-name (OPTIONAL) Enter the keyword name followed by the name
configured for the VLAN. Only information on the VLAN named is
displayed.
1065