Reference Guide

• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to
display the MAC address assigned to the VLAN. The range is 1 to
4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
pre-Version
6.2.1.1
Introduced on the E-Series.
Usage
Information
MAC Accounting information can be accessed using SNMP via the Force10 Monitor MIB. For
more information about enabling SNMP, refer to the FTOS Configuration Guide .
NOTE: Currently, the Force10 MONITOR MIB does not return the MAC addresses in an
increasing order using SNMP. As a workaround, you can use the -C c option in
snmpwalk or snmpbulkwalk to access the Force10 MONITOR MIB. For example: %
snmpwalk -C c -v 2c -c public 133.33.33.131 enterprise.6027.3.3.3
Example
FTOS-1#sh mac accounting destination interface gigabitethernet
2/1
Destination Out Port VLAN Packets Bytes
00:44:00:00:00:02 Te 11/0 1000 10000 5120000
00:44:00:00:00:01 Te 11/0 1000 10000 5120000
00:22:00:00:00:00 Te 11/0 1000 10000 5120000
00:44:00:00:00:02 Te 11/0 2000 10000 5120000
00:44:00:00:00:01 Te 11/0 2000 10000 5120000
FTOS-1#
Related
Commands
show mac accounting access-list – displays the MAC access list configurations and counters
(if configured).
show mac cam
Display the CAM size and the portions allocated for MAC addresses and for MAC ACLs.
E-Series
Syntax
show mac cam
1058