Reference Guide

Column Heading Description
VlanId Displays the VLAN ID number.
Mac Address Displays the MAC address in nn:nn:nn:nn:nn:nn format.
Type Lists whether the MAC address was manually configured (Static),
learned dynamically (Dynamic), or associated with a specific port
(Sticky).
Interface Displays the interface type and slot/port information. The following
abbreviations describe the interface types:
• gi — Gigabit Ethernet followed by a slot/port.
• po — Port Channel followed by a number. The range is 1 to
255 for TeraScale.
• so — Sonet followed by a slot/port.
• te — 10-Gigabit Ethernet followed by a slot/port.
State Lists if the MAC address is in use (Active) or not in use (Inactive).
Example
FTOS#show mac-address-table
VlanId Mac Address Type Interface State
999 00:00:00:00:00:19 Sticky Gi 0/1 Active
999 00:00:00:00:00:29 Dynamic Gi 0/2 Active
FTOS#
Usage
Information
The following describes the show mac-address-table count command shown in the
Example below.
Line Beginning With Description
MAC Entries... Displays the number of MAC entries learnt per VLAN.
Dynamic Address... Lists the number of dynamically learned MAC addresses.
Static Address... Lists the number of user-defined MAC addresses.
Total MAC... Lists the total number of MAC addresses used by the switch.
Example (Count)
FTOS# show mac-address-table count
MAC Entries for all vlans :
Dynamic Address Count : 110
Static Address (User-defined) Count : 0
Sticky Address Count : 0
Total Synced Mac from Peer(N): 100
Total MAC Addresses in Use: 110
FTOS#
Related
Commands
show mac-address-table aging-time – displays MAC aging time.
1056