Reference Guide

interface
interface
(OPTIONAL) Enter the keyword interface followed by the
interface type, slot and port information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel
followed by a number. The E-Series range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword sonet followed by
the slot/ port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to
display the MAC address assigned to the VLAN. The range is 1 to
4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
pre-Version
6.2.1.1
Introduced on the E-Series.
show cam maccheck linecard
Display the results of the BCMI2 check command.
C-Series
Syntax
show cam maccheck linecard slot port-set port-pipe
Parameters
linecard slot (REQUIRED) Enter the keyword linecard followed by a slot number
to select the linecard for which to gather information. The C300 range
is 0 to 7 and the C150 range is 0 to 4.
port-set port-pipe (REQUIRED) Enter the keywords port-set followed by a Port-Pipe
number to select the Port-Pipe for which to gather information. The
range is 0 or 1.
Command Modes
• EXEC
• EXEC Privilege
1050