Reference Guide

Parameters
mac-address-
sticky
Configures the dynamic MAC addresses as sticky on an interface.
Defaults none
Command Modes INTERFACE
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.12.0 Introduced on the S4810.
Usage
Information
If you configure mac-learn-limit and the sticky MAC feature is enabled, dynamically-
learned MAC addresses are converted to sticky for that port. Any new MAC address that is
learned also becomes sticky for that port.
Related
Commands
show mac learning-limit – Displays the details of the mac learning-limit.
mac learning-limit station-move-violation
Specify the actions for a station move violation.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
mac learning-limit station-move-violation {log | shutdown-both
| shutdown-offending | shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-
violation command, followed by the configured keyword.
Parameters
log Enter the keyword log to generate a syslog message on a station
move violation.
shutdown-both Enter the keyword shutdown to shut down both the original and
offending interface and generate a syslog message.
shutdown-
offending
Enter the keywords shutdown-offending to shut down the
offending interface and generate a syslog message.
shutdown-
original
Enter the keywords shutdown-original to shut down the
original interface and generate a syslog message.
Defaults none
Command Modes INTERFACE (conf-if-interface-slot/port)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the S-Series.
Version 7.8.1.0 Introduced on the C-Series.
1048