Reference Guide

Related
Commands
clear counters – Clear counters used in the show interface command.
clear mac-address-table dynamic – clears the MAC address table of all MAC address learned
dynamically.
mac learning-limit mac-address-sticky – Replaces deprecated no-station-move
parameter.
show mac learning-limit – displays MAC learning-limit configuration.
mac learning-limit learn-limit-violation
Configure an action for a MAC address learning-limit violation.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
mac learning-limit learn-limit-violation {log | shutdown}
To return to the default, use the no mac learning-limit learn-limit-
violation {log | shutdown}
command.
Parameters
log Enter the keyword log to generate a syslog message on a learning-
limit violation.
shutdown Enter the keyword shutdown to shut down the port on a learning-
limit violation.
Defaults none
Command Modes INTERFACE (conf-if-interface-slot/port)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the S-Series.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.5.1.0 Introduced on the E-Series.
Usage
Information
This is supported on physical interfaces, static LAGs, and LACP LAGs.
Related
Commands
show mac learning-limit – displays details of the mac learning-limit.
mac learning-limit mac-address-sticky
Maintain the dynamically-learnt mac addresses as sticky MAC addresses on the selected port.
Z-Series, S4810
Syntax
mac learning-limit mac-address-sticky
To convert the sticky MAC addresses to dynamic MAC addresses, use the no mac
learning-limit
command.
1047