Reference Guide

lacp port-priority

Configure the port priority to influence which ports will be put in standby mode when there is a hardware limitation that

prevents all compatible ports from aggregating.

C-Series, E-Series, S-Series, Z-Series, S4810

Syntax

lacp port-priority priority-value

To return to the default setting, use the no lacp port-priority priority-value

command.

Parameters

priority-value

Enter the port-priority value. The higher the value number, the lower

the priority. The range is 1 to 65535. The default is 32768.

Defaults 32768

Command Modes INTERFACE

Command History

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Version 7.6.1.0 Introduced on the S-Series.

Version 7.5.1.0 Introduced on the C-Series.

Version 6.2.1.1 Introduced on the E-Series.

lacp system-priority

Configure the LACP system priority.