Reference Guide

To end redistribution or disable any of the specified keywords, use the no redistribute
{static | connected | rip} [metric metric-value] [metric-type
{external | internal}] [level-1 | level-1-2 | level-2] [route-
map map-name] command.
Parameters
connected Enter the keyword connected to redistribute active routes into IS-
IS.
rip Enter the keyword rip to redistribute RIP routes into IS-IS.
static Enter the keyword static to redistribute user-configured routes
into IS-IS.
metric metric-
value
(OPTIONAL) Assign a value to the redistributed route. The range is 0
to 16777215. The default is 0. Use a value that is consistent with the
destination protocol.
metric-type
{external |
internal}
(OPTIONAL) The external link type associated with the default route
advertised into a routing domain. Specify one of the following:
• external
• internal
level-1 (OPTIONAL) Routes are independently redistributed into IS-IS as
Level 1 routes.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-IS as
Level-1-2 routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-IS as
Level 2 routes. This is the default.
route-map map-
name
(OPTIONAL) If you do not enter the route-map argument, all routes
are redistributed. If a map-name value is not specified, no routers are
imported.
Defaults
• metric metric-value = 0
• metric-type= internal; level-2
Command Modes
• ROUTER ISIS ( for IPv4 )
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 ( for IPv6 )
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 7.5.1.0 Added support for IPv6 ISIS.
Version 6.3.1.0 Introduced.
Usage
Information
To redistribute a default route (0.0.0.0/0), configure the default-information
originate command.
Changing or disabling a keyword in this command does not affect the state of the other
command keywords.
1014