Reference Guide

Example
FTOS#show startup-config
! Version 7.4.1.0
! Last configuration change at Thu Mar 29 02:16:07 2007 by
default
! Startup-config last updated at Thu Mar 29 02:35:08 2007 by
default
!
boot system rpm0 primary flash://FTOS-EF-7.4.1.0.bin
boot system rpm0 secondary flash://FTOS-EF-6.3.1.2.bin
boot system rpm0 default flash://FTOS-EF-6.5.1.8.bin
!
...
Related
Commands
show running-config – displays the current (running) configuration.
show version
Display the current FTOS version information on the system.
S4810
Syntax
show version
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Example (E-
Series)
FTOS#show version
Dell Force10 Networks Real Time Operating System SoftwareDe
Dell Force10 Operating System Version: 1.0
Dell Force10 Application Software Version: 5.3.1.0
Copyright (c) 1999-2004 by Dell Force10 Networks, Inc.
Build Time: Sun May 9 00:57:03 PT 2004
Build Path: /local/local0/Release/5-4-1/SW/Bsp/Diag
Dell Force10 uptime is 1 days, 3 hours, 16 minutes
System image file is "/home/5.3.1/5.3.1.0/FTOS-ED-
RPM1-5.3.1.0.bin"
Chassis Type: E1200
Control Processor: IBM PowerPC 405GP (Rev D) with 268435456
75