Reference Guide

rip
for the current RIP configuration
rmon
for the current RMON configuration
route-map
for the current route map configuration
sflow
for the current sFlow configuration
snmp
for the current SNMP configuration
spanning-
tree
for the current spanning tree configuration
static
for the current static route configuration
status
for the file status information
tacacs+
for the current TACACS+ configuration
tftp
for the current TFTP configuration
trace-group
for the current trace-group configuration
trace-list
for the current trace-list configuration
uplink-
state-group
for the uplink state group configuration
users
for the current users configuration
vlt
for the current VLT configuration
wred-profile
for the current wred-profile configuration
configured (OPTIONAL) Enter the keyword configuration to display line
card interfaces with non-default configurations only.
status (OPTIONAL) Enter the keyword status to display the checksum for
the running configuration and the start-up configuration.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 9.2.(0.0) Added support for the tunnel and EIS interface types.
Version 9.0.0.0 Added support for the VLT option.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added the hardware-monitor option.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
73