Reference Guide

file-url
To copy a file
from the internal
FLASH
enter flash:// followed by the filename
To copy a file on
an FTP server
enter ftp://
user:password@hostip/filepath
To copy the
running
configuration
enter the keyword running-config
To copy the
startup
configuration
enter the keyword startup-config
To copy using a
Secure Copy
(SCP),
enter the keyword scp:
• If you enter scp: in the source
position, enter the target URL;
• If you enter scp: in the target
position, first enter the source URL;
To copy a file on
the external
FLASH
enter slot0:// followed by the filename
To copy a file on
a TFTP server
enter tftp://hostip/filepath
To copy a file
from an external
USB drive
enter usbflash://filepath
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.4.1.0 Added IPv6 addressing support for FTP, TFTP, and SCP.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Added usbflash and rpm0usbflash commands on E-Series
ExaScale.
Version 7.6.1.0 Introduced on the S-Series and added the SSH port number to the
SCP prompt sequence on all systems.
Version 7.5.1.0 Introduced on the C-Series.
61