Reference Guide

Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Usage
Information
To display these changes in the show bootvar command output, save the running
configuration to the startup configuration (using the copy command) and reload system.
cd
Change to a different working directory.
S4810
Syntax
cd flash
Parameters
directory (OPTONAL) Enter the following:
• flash: (internal Flash) or any sub-directory
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
copy
Copy one file to another location. FTOS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP (in the hostip field).
S4810
Syntax
copy source-file-url destination-file-url
Parameters
Enter the following location keywords and information:
60