Reference Guide

set community
Allows you to assign a BGP COMMUNITY attribute.
S4810
Syntax
set community {community-number | local-as | no-advertise | no-
export | none} [additive]
To delete a BGP COMMUNITY attribute assignment, use the no set community
{community-number | local-as | no-advertise | no-export | none}
command.
Parameters
community-
number
Enter the community number in AA:NN format where AA is the AS
number (2 bytes) and NN is a value specific to that autonomous
system.
local-AS Enter the keywords local-AS to drop all routes with the
COMMUNITY attribute of NO_EXPORT_SUBCONFED.
All routes with the NO_EXPORT_SUBCONFED (0xFFFFFF03)
community attribute must not be advertised to external BGP peers.
no-advertise Enter the keywords no-advertise to drop all routes containing
the well-known community attribute of NO_ADVERTISE.
All routes with the NO_ADVERTISE (0xFFFFFF02) community attribute
must not be advertised to other BGP peers.
no-export Enter the keywords no-export to drop all routes containing the
well-known community attribute of NO_EXPORT.
All routes with the NO_EXPORT (0xFFFFFF01) community attribute
must not be advertised outside a BGP confederation boundary.
none Enter the keyword none to remove the community attribute from
routes meeting the route map criteria.
additive (OPTIONAL) Enter the keyword additive to add the communities to
already existing communities.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
252