Users Guide

• show inventory

• show login statistics

• show memory

• show processes cpu

• show processes ipc flow-control

• show processes memory

• show software ifm

• show system

• show tech-support

• ssh-peer-stack-unit

• telnet

• telnet-peer-stack-unit

• terminal length

• traceroute

• undebug all

• virtual-ip

• write

asf-mode

Enable alternate store and forward (ASF) mode and forward packets as soon as a threshold is reached.

Syntax

asf-mode stack-unit {unit-id | all} queue size

To return to standard Store and Forward mode, use the no asf-mode command.

Parameters

unit-id

Enter the stack member unit identifier of the stack member to reset. The S4810 range is from 0 to 11.

NOTE: The S4810 commands accept Unit ID numbers from 0 to 11, though S4810 supports stacking

of up to six units.

queue size Enter the queue size of the stack member. The range is from 0 to 15.

unit-id Enter the stack member unit identifier of the stack member to reset. The S4810 range is from 0 to 11.

NOTE: The S4810 commands accept Unit ID numbers from 0 to 11, though S4810 supports stacking

of up to six units.

queue size Enter the queue size of the stack member. The range is from 0 to 15.

Defaults

Not configured

Command Modes

CONFIGURATION

Control and Monitoring