Reference Guide

IPv4 Routing | 693
Example
(show ip
interface brief)
FTOS#show ip int brief
Interface IP-Address OK? Method Status Protocol
GigabitEthernet 1/0 unassigned NO Manual administratively down down
GigabitEthernet 1/1 unassigned NO Manual administratively down down
GigabitEthernet 1/2 unassigned YES Manual up up
GigabitEthernet 1/3 unassigned YES Manual up up
GigabitEthernet 1/4 unassigned YES Manual up up
GigabitEthernet 1/5 10.10.10.1 YES Manual up up
GigabitEthernet 1/6 unassigned NO Manual administratively down down
show ip management-route
c e
View the IP addresses assigned to the Management interface.
Syntax
show ip management-route [all | connected | summary | static]
Parameters
Poison Reverse... States whether poison for RIP is enabled on the interface
ICMP redirects... States if ICMP redirects are sent.
ICMP unreachables... States if ICMP unreachable messages are sent.
Table 23-12. show ip interface Command Example Items (continued)
Lines Description
Table 23-13. show ip interface brief Column Headings
Field Description
Interface Displays type of interface and the associated slot and port number.
IP-Address Displays the IP address for the interface, if configured.
Ok? Indicates if the hardware is functioning properly.
Method
Displays Manual if the configuration is read from the saved configuration.
Status
States whether the interface is enabled (up) or disabled
(administratively down).
Protocol
States whether IP is enabled (up) or disabled (down) on the interface.
all
(OPTIONAL) Enter the keyword all to view all IP addresses assigned to
all Management interfaces on the switch.
connected
(OPTIONAL) Enter the keyword connected to view only routes
directly connected to the Management interface.
summary
(OPTIONAL) Enter the keyword summary to view a table listing the
number of active and non-active routes and their sources.
static
(OPTIONAL) Enter the keyword static to view non-active routes also.