Reference Guide

658 | IPv4 Routing
www.dell.com | support.dell.com
Example
ICMP: echo request rcvd from src 40.40.40.40
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: echo request sent to dst 40.40.40.40
ICMP: echo request rcvd from src 40.40.40.40
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: echo request sent to dst 40.40.40.40
Usage
Information
Use the count option to stop packets from flooding the user terminal when debugging is
turned on.
debug ip packet
c e s
View a log of IP packets sent and received.
Syntax
debug ip packet [access-group name] [count value] [interface]
To disable debugging, use the
no debug ip packet [access-group name] [count value] [interface]
command.
Parameters
access-group name
Enter the keyword access-group followed by the access list name
(maximum 16 characters) to limit the debug output based on the
defined rules in the ACL.
count value
(OPTIONAL) Enter the keyword count followed by the count value.
Range: 1 to 65534
Default: Infinity
interface
(OPTIONAL) Enter the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitethernet followed by the slot/port information.
• For the management interface on the RPM, enter the keyword
managementethernet followed by the slot/port information. The
slot range is 0-1 and the port range is 0.
• For a Port Channel interface, enter the keyword port-channel
followed by a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword sonet followed by the
slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE
followed by the slot/port information.
• For a VLAN, enter the keyword vlan followed by a number from
1 to 4094.