Reference Guide

Interfaces | 619
RX Power High Alarm
threshold
Factory-defined setting. Value can differ between SFP and SFP+.
Temp Low Alarm
threshold
Factory-defined setting. Value can differ between SFP and SFP+.
Voltage Low Alarm
threshold
Factory-defined setting. Value can differ between SFP and SFP+.
Bias Low Alarm threshold Factory-defined setting. Value can differ between SFP and SFP+.
TX Power Low Alarm
threshold
Factory-defined setting. Value can differ between SFP and SFP+.
RX Power Low Alarm
threshold
Factory-defined setting. Value can differ between SFP and SFP+.
Temp High Warning
threshold
Factory-defined setting. Value can differ between SFP and SFP+.
Voltage High Warning
threshold
Factory-defined setting. Value can differ between SFP and SFP+.
Bias High Warning
threshold
Factory-defined setting. Value can differ between SFP and SFP+.
TX Power High Warning
threshold
Factory-defined setting. Value can differ between SFP and SFP+.
RX Power High Warning
threshold
Factory-defined setting. Value can differ between SFP and SFP+.
Temp Low Warning
threshold
Factory-defined setting. Value can differ between SFP and SFP+.
Voltage Low Warning
threshold
Factory-defined setting. Value can differ between SFP and SFP+.
Bias Low Warning
threshold
Factory-defined setting. Value can differ between SFP and SFP+.
TX Power Low Warning
threshold
Factory-defined setting. Value can differ between SFP and SFP+.
Power Low Warning
threshold
Factory-defined setting. Value can differ between SFP and SFP+.
Temperature Current temperature of the sfps.If this temperature crosses Temp High
alarm/warning thresholds, then the temperature high alarm/warning
flag is set to true.
Voltage Current voltage of the sfps.If this voltage crosses voltage high alarm/
warning thresholds, then the voltage high alarm/warning flag is set to
true.
Tx Bias Current Present Tx bias current of the SFP. If this crosses bias high alarm/
warning thresholds, then the tx bias high alarm/warning flag is set to
true. If it falls below the low alarm/warning thresholds, then the tx
bias low alarm/warning flag is set to true.
Table 22-9. Diagnostic Data in show interfaces transceiver (continued)
Line Description