Reference Guide

Force10 Resilient Ring Protocol (FRRP) | 517

Force10 Resilient Ring Protocol (FRRP)

Overview

Force10 Resilient Ring Protocol (FRRP) is supported on Dell Force10 platforms, as indicated

by the characters that appear under each of the command headings:

e E-Series, c

C-Series,

s S-Series, or .

FRRP is a proprietary protocol for that offers fast convergence in a Layer 2 network without

having to run the Spanning Tree Protocol. The Resilient Ring Protocol is an efficient protocol

that transmits a high-speed token across a ring to verify the link status. All the intelligence is

contained in the master node with practically no intelligence required of the transit mode.

Commands

The FRRP commands are:

• clear frrp

• debug frrp

• description

• disable

• interface

• member-vlan

• mode

• protocol frrp

• show frrp

• timer

Important Points to Remember

• FRRP is media- and speed-independent.

• FRRP is a Dell Force10 proprietary protocol that does not interoperate with any

other vendor.

• Spanning Tree must be disabled on both primary and secondary interfaces before

Resilient Ring protocol is enabled.