Reference Guide

Dynamic Host Configuration Protocol (DHCP) | 485
Command Mode
DHCP <POOL>
Default
None
Command
History
pool
c s
Create an address pool.
Syntax
pool
name
Parameters
Command Mode
DHCP
Default
None
Command
History
show ip dhcp binding
c s
Display the DHCP binding table.
Syntax
show ip dhcp binding
Command Mode
EXEC Privilege
Default
None
Command
History
show ip dhcp configuration
c s
Display the DHCP configuration.
Syntax
show ip dhcp configuration
[global | pool name]
Parameters
Command Mode
EXEC Privilege
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduced on C-Series and S-Series.
name Enter the address pool’s identifying name
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduced on C-Series and S-Series.
Version 8.2.1.0 Introduced on C-Series and S-Series.
pool name
Display the configuration for a DHCP pool.
global
Display the DHCP configuration for the entire system.