Reference Guide

288 | Bidirectional Forwarding Detection (BFD)
www.dell.com | support.dell.com
show bfd counters
c e
Display BFD counter information.
Syntax
show bfd counters
[bgp | isis | ospf | vrrp | static-route] [interface]
Parameters
Defaults
None
Command Modes
EXEC
EXEC Privilege
Command
History
bfd neighbor Explicitly enable a BFD session with a BGP neighbor or a BGP peer
group.
show bfd neighbors Display BFD neighbor information on all interfaces or a specified
interface.
interface
Enter one of the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitethernet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by the slot/port information.
• For a SONET interface, enter the keyword sonet followed by the
slot/port information.
• For a port-channel interface, enter the keyword port-channel
followed by a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 255 for TeraScale, and 1 to 512 for
ExaScale
• For VLAN interfaces, enter the keyword vlan followed by a
number from 1 to 4094. For ExaScale VLAN interfaces, the
range is 1-2730 (VLAN IDs can be 0-4093).
bgp
(OPTIONAL) Enter this keyword to display counter information for
BFD sessions established with BGP neighbors.
isis (OPTIONAL) Enter this keyword to display counter information for
BFD sessions established with ISIS neighbors. This option is not
available on C-Series.
ospf
(OPTIONAL) Enter this keyword to display counter information for
BFD sessions established with OSPF neighbors.
static-route
(OPTIONAL) Enter this keyword to display counter information for
BFD sessions established with ISIS neighbors.
vrrp (OPTIONAL) Enter this keyword to display counter information for
BFD sessions established with VRRP neighbors.
Version 8.4.1.3 Added support for BFD for BGP on the E-Series ExaScale.
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.7.1.0 Introduced on C-Series