Reference Guide

Access Control Lists (ACL) | 193
Related
Commands
resequence access-list
c e s
Re-assign sequence numbers to entries of an existing access-list.
Syntax
resequence access-list {ipv4 | ipv6 | mac} {access-list-name StartingSeqNum Step-to-Increment}
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
When all sequence numbers have been exhausted, this feature permits re-assigning new
sequence number to entries of an existing access-list.
Related
Commands
resequence prefix-list ipv4
c e s
Re-assign sequence numbers to entries of an existing prefix list.
Syntax
resequence prefix-list ipv4 {prefix-list-name StartingSeqNum Step-to-increment}
deny Assign a IP ACL filter to deny IP packets.
ip access-list standard Create a standard ACL.
ipv4 | ipv6 | mac Enter the keyword ipv4, or mac to identify the access list type to
resequence.
access-list-name Enter the name of a configured IP access list.
StartingSeqNum
Enter the starting sequence number to resequence.
Range: 0 to 4294967290
Step-to-Increment
Enter the step to increment the sequence number.
Range: 1 to 4294967290
Version 8.2.1.0 Introduced on E-Series ExaScale (IPv6)
Version 8.1.1.0 Introduced on E-Series ExaScale (IPv4)
Version 7.8.1.0 Increased name string to accept up to 140 characters. Prior to
7.8.1.0, names are up to 16 characters long.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 7.4.1.0 Introduced
resequence prefix-list ipv4 Resequence a prefix list