Reference Guide

1380 | Simple Network Management Protocol and Syslog
www.dell.com | support.dell.com
To delete the SNMP location, enter no snmp-server location.
Parameters
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
snmp-server packetsize
c e s z
Set the largest SNMP packet size permitted when the SNMP server is receiving a request or
generating a reply, use the
snmp-server packetsize global configuration command.
Syntax
snmp-server packetsize
byte-count
Parameters
Defaults
8
Command Modes
CONFIGURATION
Command
History
snmp-server trap-source
c e s z
Configure a specific interface as the source for SNMP traffic.
Syntax
snmp-server trap-source
interface
To disable sending traps out a specific interface, enter no snmp trap-source.
text
Enter an alpha-numeric text string, up to 55 characters long.
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
byte-count
Enter one of the following values 8, 16, 24 or 32. Packet sizes are 8000 bytes,
16000 bytes, 32000 bytes, and 64000 bytes.
Version 8.3.11.1 Introduced on Z9000
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command