Reference Guide

Security | 1305
Parameters
Defaults
3 retries
Command Modes
CONFIGURATION
Command
History
Related
Commands
radius-server timeout
c e s
Configure the amount of time the RADIUS client (the switch) waits for a RADIUS host
server to reply to a request.
Syntax
radius-server timeout
seconds
To return to the default value, enter no radius-server timeout.
Parameters
Defaults
5 seconds
Command Modes
CONFIGURATION
Command
History
Related
Commands
retries
Enter a number of attempts that FTOS tries to locate a RADIUS server.
Range: zero (0) to 100.
Default: 3 retries.
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.2.1.1 Introduced on E-Series
radius-server host Configure a RADIUS host.
seconds
Enter the number of seconds between an unsuccessful attempt and the FTOS
times out.
Range: zero (0) to 1000 seconds.
Default: 5 seconds.
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.2.1.1 Introduced on E-Series
radius-server host Configure a RADIUS host.