Reference Guide

Routing Information Protocol (RIP) | 1235
Command
History
Usage
Information
This command triggers updates of the main RIP routing tables.
debug ip rip
c e s
Examine RIP routing information for troubleshooting.
Syntax
debug ip rip [interface | database | events [interface] | packet [interface] | trigger]
To turn off debugging output, use the
no debug ip rip command.
Parameters
Command Modes
EXEC Privilege
Command
History
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
interface
(OPTIONAL) Enter the interface type and ID as one of the following:
• For a Gigabit Ethernet interface, enter the keyword GigabitEthernet followed
by the slot/port information.
• For a Port Channel interface, enter the keyword port-channel followed by a
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword sonet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by
the slot/port information.
• For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
Note: This option is available only on E-Series when entered as a standalone
option. It is available on both C-Series and E-Series as a sub-option.
database
(OPTIONAL) Enter the keyword database to display messages when there is a
change to the RIP database.
events
(OPTIONAL) Enter the keyword events to debug only RIP protocol changes.
packet
(OPTIONAL) Enter the keyword events to debug only RIP protocol packets.
Note: This option is available only on C-Series.
trigger
(OPTIONAL) Enter the keyword trigger to debug only RIP trigger extensions.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series