Users Guide

31
Link Aggregation Control Protocol (LACP)
This section contains commands for Dell Networks’ implementation of the link aggregation control protocol (LACP) for creating
dynamic link aggregation groups (LAGs) — known as “port-channels” in the Dell Networking OS.
NOTE: For static LAG commands based on the standards specied in the IEEE 802.3 Carrier sense multiple access with
collision detection (CSMA/CD) access method and physical layer specications, see
Port Channel Commands .
clear lacp counters
Clear port channel counters.
S4810
Syntax
clear lacp port-channel-number counters
Parameters
port-channel-
number
Enter a port-channel number.
Defaults Without a Port Channel specied, the command clears all Port Channel counters.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
950
Link Aggregation Control Protocol (LACP)