Users Guide

Version Description
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
7.5.1.0 Added support for IPv6 ISIS.
6.3.1.0 Introduced.
Usage Information How a metric value assigned to a redistributed route is advertised depends on how on the conguration of
the metric-style command. If the metric-style command is set for Narrow mode and the metric
value in the redistribute ospf command is set to a number higher than 63, the metric value
advertised in LSPs is 63. If the
metric-style command is set for wide mode, the metric value in the
redistribute ospf command is advertised.
router isis
Allows you to enable the IS-IS routing protocol and to specify an IP IS-IS process.
S4810
Syntax
router isis [vrf vrf-name] [tag]
To disable IS-IS routing, use the no router isis [tag] command.
Parameters
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to enable the IS-IS routing
protocol and to specify an IP IS-IS process on that VRF.
tag (OPTIONAL) This is a unique name for a routing process. A null tag is assumed if
the tag option is not specied. The tag name must be unique for all IP router
processes for a given router.
Defaults Not congured.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
Intermediate System to Intermediate System (IS-IS)
935