Users Guide
The congured password injects into Level 1 LSPs, CSNPs, and PSNPs.
Related Commands
• domain-password — set the authentication password for a routing domain.
• isis password — congure an authentication password for an interface.
clear isis
Restart the IS-IS process. All IS-IS data is cleared.
S4810
Syntax
clear isis [vrf vrf-name] [tag] {* | database | traffic}
Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to restart the
IS-IS process corresponding to that VRF.
tag (Optional) Enter an alphanumeric string to specify the IS-IS routing tag area.
* Enter the keyword * to clear all IS-IS information and restart the IS-IS process. This
command removes IS-IS neighbor information and IS-IS LSP database information
and the full SPF calculation is done.
database Clears IS-IS LSP database information.
trac Clears IS-IS counters.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.7(0.0) Added support for VRF. Introduced on the S6000–ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
clns host
Dene a name-to-network service mapping point (NSAP) that you use with commands that require NSAPs and system IDs.
Syntax
clns host name nsap
Parameters
name Enter an alphanumeric string to identify the name-to-NSAP mapping.
Intermediate System to Intermediate System (IS-IS)
891