Users Guide
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original Command
Usage Information After entering the banner login command, type one or more spaces and a delineator character. Enter the
banner text then the second delineator character. When the user is connected to the router, if a message of
the day banner is congured, it displays rst. If no message of the day banner is congured, the login banner
and prompt appear. After the user has logged in, the banner EXEC (if congured) displays.
Example
Dell(conf)# banner exec ?
LINE c banner-text c, where 'c' is a delimiting character
Dell(conf)# banner exec %
Enter TEXT message. End with the character '%'.
This is the banner%
Dell(conf)# end
Dell# exit
4d21h5m: %RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated for user on
line
console
This is the banner
Dell con0 now available
Press RETURN to get started.
4d21h6m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user on line
console
This is the banner
Dell>
Related Commands
• line — enables and congures the console and virtual terminal lines to the system.
banner login
Set a message of the day banner to appear after logging on to the system.
Syntax
banner login {keyboard-interactive | c line c}
Enter no banner login to delete the banner text. Enter no banner login keyboard-
interactive to automatically go to the banner message prompt (does not require a carriage return).
Parameters
keyboard-
interactive
Enter the keyboard-interactive keyword and then press Enter (carriage
return) to retrieve the message banner prompt.
c Enter a delineator character to specify the start and end of the text banner. You
cannot use the delineator character in the banner message.
Control and Monitoring
89