Users Guide

show iscsi session
Display information about active iSCSI sessions on the switch.
Syntax
show iscsi session
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.
Example
Dell# show isci session
Session 0:
------------------------------------------------------
Target: iqn.2001-05.com.equallogic:0-8a0906-0e70c2002-10a0018426a48c94-
iom010
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000
Session 1:
---------------------------------------------------------
Target: iqn.2001-05.com.equallogic:0-8a0906-0f60c2002-0360018428d48c94-
iom011
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000.
Usage Information
Only sessions the switch observes are learned; sessions owing through an adjacent switch are not learned.
After the switch is reloaded, any information exchanged during the initial handshake is not available. If the
switch picks up the communication after reloading, it would detect a session was in progress but could not
obtain complete information for it. Any incomplete information of this type would not be available in the
show commands.
Related Commands
• show iscsi — display the currently congured iSCSI settings.
• show iscsi session detailed — display detailed information about active iSCSI sessions on the switch.
• show run iscsi — show run iscsi.
show iscsi session detailed
Display detailed information on active iSCSI sessions on the switch.
Syntax
show iscsi session detailed [session isid]
iSCSI Optimization
885